Pro3000模擬音頻發生器和探頭(電話線路測試儀) – 模擬音頻和探頭套件跟蹤線纜并利用聲音指示。
Pro3000模擬音頻發生器和探頭(電話線路測試儀)產品概覽：
發送音頻并對無源網絡上的導線進行跟蹤
SmartTone 技術提供了五種不同音頻以進行精確線對識別
可在大多數電纜上將響亮音頻發送到最遠 10 英里（16 公里）處
探頭上的揚聲器可使音頻穿越干燥墻壁、木質結構和其他外殼而被聽到
通過帶角度的連接夾，可方便地接觸到各個線對
RJ11 接頭適合在電話插孔上使用
將尼龍兜（包含于套件中）與工具帶相連以便于運送
18月保修（從出廠日起算）
Pro3000模擬音頻發生器和探頭(電話線路測試儀)產品功能：
Pro3000 模擬音頻發生器和探頭是在無源網絡上發送音頻并跟蹤導線的上佳工具，尤其可通過 SmartTone 技術來識別線對。通過帶角度的連接夾，可方便地接觸各個導線，RJ11 接頭適合在電話插孔上使用。探頭上的大號揚聲器可使您隔著干燥墻壁、木質結構或其他外殼聽到音頻，以便快速方便地找到導線。您可在大多數電纜上將這種響亮音頻發送到最遠 10 英里（16 公里）處！將尼龍兜與您的工具帶相連，您就擁有了完成任意導線識別工作的配備。
Pro3000模擬音頻發生器和探頭(電話線路測試儀)技術指標：
| Pro3000 Analog Toner Specifications |
| User interface |
Slide switch selects Continuity or Tone ModePush button switch selects SOLID, ALT or OFFTone mode LEDContinuity/Polarity LED |
| Solid Frequency |
1000 Hz nominal |
| Alternating Frequency |
1000/1500 Hz nominal |
| Over Voltage Protection |
60 Vdc in Toner/Polarity Mode |
| Output Power in Tone Mode |
8 dbm into 600 ohms |
| Output Voltage Level in Continuity Mode |
8 Vdc with fresh battery |
| Battery |
9V alkaline |
| Temperature |
Operating: -20? C to 60? C, Storage: -40? C to 70? C |
| Case dimensions |
2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm) |
| Pro3000 Analog Probe Specifications |
| User interface |
ON/OFF pushbuttonVolume dialReplaceable tip3.5 mm earphone jack |
| Battery |
9V alkaline |
| Temperature |
Operating: -20? C to 60? C, Storage: -40? C to 70? C |
| Case dimensions |
9.8 in. x 1.6 in. x 1.3 in. (24.9 cm x 4.1 cm x 3.3 cm) |
| Pro3000 Analog Toner Specifications |
| User interface |
Slide switch selects Continuity or Tone ModePush button switch selects SOLID, ALT or OFFTone mode LEDContinuity/Polarity LED |
| Solid Frequency |
1000 Hz nominal |
| Alternating Frequency |
1000/1500 Hz nominal |
| Over Voltage Protection |
60 Vdc in Toner/Polarity Mode |
| Output Power in Tone Mode |
8 dbm into 600 ohms |
| Output Voltage Level in Continuity Mode |
8 Vdc with fresh battery |
| Battery |
9V alkaline |
| Temperature |
Operating: -20? C to 60? C, Storage: -40? C to 70? C |
| Case dimensions |
2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm) |
| Pro3000 Analog Probe Specifications |
| User interface |
ON/OFF pushbuttonVolume dialReplaceable tip3.5 mm earphone jack |
| Battery |
9V alkaline |
| Temperature |
Operating: -20? C to 60? C, Storage: -40? C to 70? C |
| Case dimensions |
9.8 in. x 1.6 in. x 1.3 in. (24.9 cm x 4.1 cm x 3.3 cm) |
]]>