技術指標
除非另有說明,此處的指標適用 23 °C (73 °F)環境。
環境與規章指標
工作溫度: 32 °F 至 104 °F (0 °C 至 40 °C)
貯存溫度:-4 °F 至 +140 °F (-20 °C 至 +60 °C)
工作相對濕度(% RH 無冷凝):
95 % (50 °F 至 95 °F ; 10 °C 至 35 °C)
75 % (95 °F 至 104 °F ; 35 °C 至 40 °C)
無控制 < 50 °F (< 10 °C)
震動: 任意, 2 g, 5 Hz-500 Hz
沖擊: 1 米高度落地測試
安全: IEC 61010-1, 類別:無
海拔高度: 3000 米
EMC: IEC 61326-1, FCC B 部分
IT200 音頻探頭電氣指標(MT-8200-61-TNR)
輸出電源 5 V p-p
音頻探頭頻率 1 種數字音頻, 500 kHz
電池類別與壽命 9 V 堿性電池 (NEDA 1604A 或 IEC 6LR61);一般 20 小時
自動關機 4 小時無活動后自動關機
IP200 探頭電氣指標(MT-8200-63A)
音頻探頭頻率 探測 IT200 音頻探頭的 IntelliTone 信號以及其他音頻探頭的 1 kHz 信號
電池類別與壽命 9 V 堿性電池 (NEDA 1604A 或 IEC 6LR61);一般 20 小時
自動關機 1 小時無活動后自動關機
產品兼容性
尺寸
音頻探頭:5.54 英寸 x 2.94 英寸 x 1.25 英寸
(14.1 厘米 x 7.5 厘米 x 3.2 厘米)
探頭:8.73 英寸 x 1.88 英寸 x 1.26 英寸
(22.2 厘米 x 4.8 厘米 x 3.2 厘米)
重量 (含電池)
音頻探頭:6.0 盎司 (170 克)
探頭:4.7 盎司 (133 克)
接廠家通知,MT-8200-60A系列/MT-8200-50A系列查線儀原有型號已經停產,深圳市福欣智能網絡科技有限公司還有少量庫存,替代型號價格及到貨時間另行通知。
以下IntelliTone?Pro?100?&?200系列產品原有型號停產,深圳福欣(0755-82816978)目前庫存還有貨,欲購從速。
?
| Obsolete?SKU停產型號 | New?Replacement?SKU替代型號 | ||||
| Model | Description | Model | Description | ||
| MT-8200-60A | IntelliTone?Pro?200?Toner?and?Probe?Kit | MT-8200-60-KIT | IntelliTone?Pro?200?LAN?Toner?and?Probe?Kit | ||
| MT-8200-50A | IntelliTone?Pro?100?Std?Toner?and?Probe?Kit | MT-8200-60-KIT | IntelliTone?Pro?200?LAN?Toner?and?Probe?Kit | ||
| MT-8200-61A | IntelliTone?Pro?200?Toner | MT-8200-61-TNR | IntelliTone?Pro?200?LAN?Toner | ||
| MT-8200-53A | IntelliTone?Pro?100?Probe | MT-8200-63A | IntelliTone?Pro?200?Probe | ||
The IntelliTone Pro 200 LAN Toner is a digital and analog tone generator that verifies and troubleshoots virtually any copper cabling in networks—identifying the type of service and verifying continuity—and its F-type connector supports VDV cables including RJ45, RJ11, coaxial, and bare wire while its banana jacks accommodate test leads. It identifies and diagnoses 10/100 Gigabit Ethernet link connectivity with NIC (network interface card)/hub indication. The toner generates IntelliTone digital signals that minimize the effect of signal bleed for locating high-grade data cabling (Cat 5e/6/6a) on active networks, and generates 500 to 1,200 Hz analog signals with four distinct Smart Tone cadences for isolating individual wire pairs and locating voice, audio, and video cabling (Cat 3 and below) on inactive networks. The IntelliTone signals can be detected by devices such as the Intellitone Pro 200 Probe (sold separately) and the analog signals can be detected by a ?probe or other standard 1kHz analog probe (sold separately). LED indicators identify a jack as or dead. The unit turns off automatically after 2.5 hours of inactivity. It comes with an RJ11-to-RJ11 patch cord, RJ45-to-RJ45 patch cord, a test lead set with banana jacks to alligator clips, a female-to-female F-type connector adapter, a 9V alkaline battery and instructions. Additional specifications include various environmental operating conditions. Tone generators are used by network technicians to troubleshoot and maintain wires and cable in various networks.
MT-8200-61-TNR:IntelliTone Pro200音頻發生器
]]>